The master's dissertation consists of the introduction, 5 sections, the conclusion, the list of used literature and annex. The full volume is 86 pages contains 31 illustrations, 28 tables. Total processed 41 literature sources.

Purpose: increasing the information content of medical thermograms by thermostabilizing the optical system of the thermal imager and introducing software tools for processing thermograms.

Main results: Defocusing problem of thermograph lens under the ambient temperature effect is considered in this article. Optical scheme of the IR triplet is propose, which parameters are calculated using the method of passive optical athermalization. Based on the proposed method of thermograph thermoresponsive lens filling and further optimization was designed ternary diagram of temperature-compensated infrared lens matrix with a dimension of 320x240 pixel 25x25 mkm. Thanks to this method, and the calculations in the mathematical software Mathcad has been received a number of termaltake triplets infrared spectral range combinations of 8-14 microns. At the same time was achieve thermal stabilization and system achromatization.

This master's dissertation consists of 87 pages, 21 illustrations, 24 tables.

In this master's thesis an automatic ultrasonic control system for pipes using LRUT technology was developed. This topic is relevant today as automation and large volumes of non-destructive testing require systems that can handle this. The system proposed in this paper consists of modern technologies in UZK. To ensure acoustic constant contact between the object of control and the system, the latest ideas are used. The simulation of the system was carried out using modern software. Also, development of a potential startup of the project was conducted, and the possibility of the system's exit to the international and domestic markets was considered.

The purpose of the master's thesis is to explore the possibility of using ultrasonic control of large diameter and size pipes.
The developed system can be applied to non-destructive control as a primary or auxiliary. Also, due to the versatility of the algorithms, work with minimal changes can be rebuilt for another way of finding defects in the pipelines.

The presented paper contains 73 pages, 28 illustrations, 22 tables and 31 names of the used sources.

In the master's dissertation the review of literary sources on the subject of diagnostics of a person's view was conducted. Defects and visual impairments, as well as the possibility of their detection, are described. The main focus on the review was the violation of the perception of color by the human eye and the existence of systems by which such violations can be detected. On the basis of the review of literary sources, a functional scheme was developed and a selection of elements was made that allow automating the diagnostic process of the system. Synthesis of the system with the use of software, in coordination with elements of the functional scheme is executed. Also in the dissertation there is a section of the development of the startup project, which describes the possibility of the release of this system on the market and to compete with existing analogous systems.

This master's dissertation consists of 76 pages, 17 illustrations, 25 tables, 19 sources according to the list of references.

In the master's thesis the instruments, axle control systems, their comparison, and the choice of the method of the method of analysis were analyzed.
The characteristics of the automated non-destructive testing system, advantages and disadvantages are considered. An ultrasonic wheel axle control system was developed. A system is proposed that includes a mechanical block, a flaw detection unit, and a data processing unit. The defectoscopy unit consists of four channels of two transducers in each. The marketing component of the startup project is analyzed to determine the possibility of its implementation and possible market directions of implementation.

This master's dissertation consists of 83 pages, 36 illustrations, 23 tables.

In this master's thesis was developed Bluetooth indoor orientation system.

This topic is relevant today, since in the conditions of automation of production processes the same tendency occurs in non-destructive control, and for automatic or automated devices of non-destructive control, orientation systems in space are required.

System, proposed in this work, consists of modern software and hardware components. The hardware part is Bluetooth-beacons, based on the newest Bluetooth LE v4.0 devices, and any device equipped with a Bluetooth module can be a signal receiver. The software part performs the functions of measuring the distance to control points (beacons), calculating the coordinates of the object location, and filtering the data.

Page 1 of 6

ПСНК КПІ ім. Ігоря Сікорського, 2017